Portfolio

Examples of molds and products from Sky Wise projects.

Technology projects

Six mold examples with photos, purpose and key technical parameters.

Air deflector part — photo 1 Air deflector part — photo 2 Air deflector part — photo 3 Air deflector part — photo 4

2K Mold Technology

Two-component mold

Air deflector part

Two-component molding project for an automotive part combining PC+ABS and TPE.

Automotive industry

Part size
85.6 × 31.6 × 12.1 mm
Number of cavities
2+2
Mold size
460 × 500 × 557 mm
Part material
PC+ABS / TPE
  • 2K
  • Two-plate mold
  • 4 sliders
Oil reservoir cap — photo 1 Oil reservoir cap — photo 2 Oil reservoir cap — photo 3 Oil reservoir cap — photo 4 Oil reservoir cap — photo 5

Un-screwing Mold Technology

Mold with an unscrewing mechanism

Oil reservoir cap

Automotive cap made of reinforced polyamide with an unscrewing mechanism.

Automotive industry

Part size
85.61 × 85.61 × 29.57 mm
Number of cavities
4
Mold size
500 × 450 × 500 mm
Part material
PA66+GF30
  • Unscrewing
  • Two-plate mold
  • 3 sliders
Cover — photo 1 Cover — photo 2 Cover — photo 3 Cover — photo 4 Cover — photo 5

High Challenge Mold Technology

High-complexity mold

Cover

High-complexity mold for an electronic cover with eight sliders.

Electronics

Part size
80 × 80 × 30 mm
Number of cavities
2
Mold size
250 × 350 × 430 mm
Part material
ASA30
  • Two-plate mold
  • 8 sliders
Automotive door panels — photo 1 Automotive door panels — photo 2 Automotive door panels — photo 3 Automotive door panels — photo 4 Automotive door panels — photo 5

Automotive Mold Technology

Automotive door panel mold

Automotive door panels

The project combines two automotive door panels of different sizes in a 1+1 cavity configuration.

Automotive industry

Part dimensions
926 × 718 × 109 mm; 435 × 392 × 96 mm
Number of cavities
1+1
Mold size
1800 × 1300 × 1190 mm
Part materials
ABS+PP
  • Automotive mold
  • Two-plate mold
  • 3 sliders
Steering mechanism lower cover — photo 1 Steering mechanism lower cover — photo 2 Steering mechanism lower cover — photo 3 Steering mechanism lower cover — photo 4 Steering mechanism lower cover — photo 5

Multi Slider Mold Technology

Multi-slider mold

Steering mechanism lower cover

Mold for a PP part with six sliders.

Products for outdoor use

Part size
192.7 × 240.5 × 437.5 mm
Number of cavities
1
Part material
PP
  • Multi-slider mold
  • Two-plate mold
  • 6 sliders
Automotive deflector — photo 1 Automotive deflector — photo 2 Automotive deflector — photo 3 Automotive deflector — photo 4 Automotive deflector — photo 5

Complex Mold Structure Technology

Complex mold

Automotive deflector

Complex mold for an automotive deflector with a 1+1 cavity configuration and eight sliders.

Automotive industry

Part size
104.2 × 78.1 × 107.4 mm
Number of cavities
1+1
Mold size
696 × 996 × 755 mm
Part material
PC+ABS
  • Complex design
  • Two-plate mold
  • 8 sliders